CNC milling machine OPTImill F 150HSC with 24-fold tool changer


CNC milling machine OPTImill F 150HSC with 24-fold tool changer


Short description

  • SIEMENS SINUMERIK 828D with PPU 290 with 15.6-inch touch display
  • Robust design
  • High productivity
  • High reliability
  • Strongly ribbed, torsion-free machine base
  • Profile rail with the recirculating ball for high Rapid traverse speeds in all axes
  • High-torque servo drives in all three axes
  • Telescopic guideway cover on all three axes
  • Solid, precise milling table with four T-slots, large dimensions, and precision ground
  • Portable, electronic handwheel with enabling button and emergency stop push button. Makes it much easier to run programs
  • Coolant device with 210 liter coolant tank with chip flushing system and cleaning gun
  • Chip conveyor in screw conveyor design
  • RJ45 plug connection, USB and 230 V power connection
  • Spindle oil cooler
  • Closed switch cabinet with an integrated heat exchanger; ensures optimum temperature and prevents dirt particles from penetrating
  • Machine light in the work area

Are you interested in this product?


Type Sinumerik 828D
System software SW 28x
CNC memory 8 MB
Set change time 1 ms
Look Ahead 150
Number of tools 512
Cooling lubricant system
Number of coolant pumps 3 St
Coolant pump(s) drive power each 1.27 kW
Tank capacity 210 l
Flow rate 66 – 100 l/min
Dimensions and weights
Length approx. 3000 mm
Width/depth approx. 1950 mm
Height approx. 2310 mm
Weight approx. 4350 kg
Drilling/milling output
Max. size milling head 63 mm
Max. size shaft milling cutter 32 mm
Electrical connections
Total rated value 31 kVA
Electrical Data
Supply voltage 400 V
Mains frequency 50 Hz
Fast motion speed
X axis 36000 mm/min
Y axis 36000 mm/min
Z axis 36000 mm/min
Feed force
Feed force X-axis 3,0 kN
Feed force Y-axis 5.5 kN
Feed force Z-axis 5.5 kN
Feed motor torque
X axis continuous operation S1 7.3 Nm
Y axis continuous operation S1 10.5 Nm
Z axis continuous operation S1 15 Nm
Milling table horizontal
Table length 900 mm
Table width 410 mm
Reach 480 mm
Min. clearance vertical spindle – milling table 102 mm
Max. clearance vertical spindle – milling table 562 mm
T-groove size 16 mm
T-groove number 4
T-groove spacing 102 mm
Max. load bearing capacity 350 kg
Pneumatic connection
Operating pressure 5 – 7 bar
Repetition accuracy ± 0.005 mm
Positioning accuracy ± 0.005 mm
X axis automatic 760 mm
Y axis automatic 440 mm
Z axis automatic 460 mm
Design Double arm gripper
Number of tool slots 24 Tools
Max. tool diameter adjacent slots free 125 mm
Max. tool diameter 80 mm
Max. tool length 200 mm
Max. tool weight 8 kg
Tool change time tool to tool (T to T) 2 s
Vertical spindle
Spindle chuck SK 40 DIN 69871
Speed range 12000 min¯¹
Explanation speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation.
Drive motor output continuous operation S1 9 kW
Drive motor output S6-30 % operation 21,2 kW
Torque drive motor continuous operation S1 57 Nm
Torque drive motor S6-30 % operation 135 Nm


Atsiliepimų dar nėra.

Būkite pirmas aprašęs “CNC milling machine OPTImill F 150HSC with 24-fold tool changer”

Your email address will not be published. Required fields are marked *

Post comment

Products from the same category